Step 3

Third, you need to know how to set the
safety guard. It must be adjusted to work with the size
material you are using and the size cut you are
making.
You
can move the guard cover in and out by using the two
ajustment knobs on either side of the guard base. Be sure to
move the guard out enough that the blade is
covered.
You can raise and lower the guard
using the crank handle located on the top of the guard
base. Be sure the guard is high enough to allow the
material to move beneath it, yet low enough to deflect
chips and other flying objects. Even with the guard in
place, you must still use safety goggles.
|